• WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi
  • WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi

WITRN 400W 8Ports Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi

Availability: Out Of Stock

  • Price:$44.52
  • Price in reward points: 445 Reward Points: 4
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $43.63 $42.74 $41.40 $39.62 Contact US
Quantity:

You might like

  • $0.00
  • $0.00
  • $0.00

WITRN Power Charger PD Car Charger Power Station Dual Port VOOC PD3.0 QC4 for Huawei Apple Xiaomi

Description:

- The input voltage of all modules is DC12V ~ 28V, which will be damaged immediately if exceeded!

- Xt30 X60 DC port is only used for small power test. It is recommended that the input power of DC port should not exceed 300W, otherwise the DC port will be damaged. Please use XT port for high power input

- Connectors for these modules do not sell separately


Specification:

- Power: 400W 8 Ports

- the main chip adopts 3518S

- Usb-c port: support PPS PD qc4 + qc2.0 qc3.0 AFC FCP SCP MTK and conventional 5V DCP aple2.4a

- E-marker wire is required for 100W 20V 5A output of Type-C port, otherwise only 20v 3a output capacity is available

- Usb-a port: no PD PPS qc4 +, other protocols are the same as port C, with more vooc output (original cable is required)


Note
Do not connect the positive and negative poles reversely when you DIY the module ,otherwise the module will be damaged. 7

Before the module is powered on, please check the positive and negative poles. With a multimeter, you can check whether the positive and negative DC ports are reversed (internal positive and external negative).  you can check whether the LED is on or not by xt30 and XT60 power station. If it is not, it is reversed

we recommend measured with a multimeter after xt30 and XT60 are connected with DC Cables

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha