Yzxstudio ZC925 280W Car Charger Table Charger PD Fast Charger Converter Supports SuperVOOC65W SCP

Yzxstudio ZC925 280W Car Charger Table Charger PD Fast Charger Converter Supports SuperVOOC65W SCP

Compatibility Warning:
- Only the newest ones of VIVO phones support PPS fast charging. This converter can be used for acceleration. The full series of old VIVO mobile phones are not supported.
- This product is not available for OnePlus 12.
- If you are using SuperVOOC, please note that only port A supports SuperVOOC! However, the C-port does not support SuperVOOC!
- You must use a genuine VOOC cable from USB to C for fast charging, and C-C cable for VOOC fast charging is not supported!
- A to C SuperVOOC cable is optional. Contact us if it is needed.

Attention:
- Since the output is already 65W, the power supply for charging SV should be 70W or above. A mobile phone virtual standard fast charging charger cannot be used. It is only recommended to use a laptop high-power PD or DC power supply. If the power is low, it will keep restarting. Customers are responsible for the costs associated with returning the product for this reason.

Connection:
- Connection of power bank or PD charger: power bank - CC cable - converter - original USB to C cable - mobile phone.
- Connection of car cigarette lighter: cigarette lighter plug to DC5525 - converter - original USB to C cable - mobile phone.

Common Application Scenarios:
- For power bank fast charging to SuperVOOC fast charging, especially some high-power power banks, with less supported protocols, can be converted with this adapter.
- All kinds of laptop high-power PD power supply or DC power supply: Through this converter, various other mobile phone PD fast charging protocols can be supported.

Question and Answer:
Why the power of my device still can't reach 140W, 100W, etc., using the converter?
1. Your device requests the required power on demand. Not in all cases, devices must be running at full power. If a laptop is running at full power, you can try charging and running stress test software to make the CPU and GPU at full load as possible;
2. After connecting the device in series, the internal resistance becomes larger, resulting in a large voltage drop, and the equipment cannot obtain more power. Please try to test the power of input terminal or the power of 220V power strip to avoid a large voltage drop in string table;
3. If you need it to output 20V gears such as 140W and 100W, input should be over 20V. The module can only step down, so if the input is 19V, there will be only 15V gears for output.
4. The input power must be greater than the output power by more than 5%. For example, if the output is 100W, it needs to input 105W or more. Otherwise, it will lead to frequent restarts, downshifts, and even burn out the power supply.

Specifications:
- Dimensions: 64mm x 45mm x 19mm/2.5" x 1.8" x 0.7"
- Input interface: DC5.5*2.5 (positive inside and negative outside) 10A maximum; XT60 interface up to 20A; USB-C port up to 6A
- Input voltage: 10-26V, withstand voltage 30V
- Input protocol: DC, PD2.0, PD3.0, automatic-trigger up to 20V
- Output interface: USB-C port*2 and USB-A port*1
- Output ripple: less than 50mV at full load
- Output protocol:
* C1: Supports buck-boost and the output voltage can be higher than the input voltage. Supports universal fast charging such as PD3.1-28V-5A, PD3.0-3-21V-5A, PD2.0-20V-5A and QC4321.
* C2: Step-down only, that is, the output voltage is lower than the input voltage. It supports public version fast charging, including PD3.0-3-21V-6.5A, PD2.0-20V-7A and QC4321.
* A: Only buck can be supported. When used at the same time as the C2, it can only support 5V 2.4A slow charging. When used alone, it supports universal fast charging, such as SuperV00C65W, SCP22.5W and QC321.
- Quality materials: All-solid-state capacitors, Wute inductors or MAGIC inductors, output LC filtering ultra-low ripple, six power transistors for ON, two path power transistors, OPPO original high-current USB port, KRCONN high-end TID certified C port and Am*ss genuine XT60 port. Output full terminal is equipped with anti-surge, anti-static and anti-short-circuit ESD diode. It features an aluminum alloy shell with excellent heat dissipation performance.
- Indicator light: Red light will be on when it turns on. Blue light will be on when there is output. Output voltage is proportional to the brightness.

Package Included:
- 1 x Fast Charger Converter

Packaging Details:
- G.W.: 0.25kg