3G Combo Handheld Spectrum Analyzer Portable Spectrum Analyzer 15-2700MHz Frequency Resolution 1KHz

3G Combo Handheld Spectrum Analyzer Portable Spectrum Analyzer 15-2700MHz Frequency Resolution 1KHz

Description:
3G Combo is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated frequency synthesizer and double balanced mixer which offers high performance, compact size, low consumption and low cost.

It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector.

The product includes a WSUB1G module plus a RFEMWSUB3G expansion module, and has done convenient packaging and testing. The product comes with two SMA connectors and two antennas. One is NA-773 wideband adaptive antenna, which is used in all sub-GHz frequency bands; the other is helical antenna, which is suitable for 2.4GHz frequency band. In addition, individual frequency bands may require specific antenna support.

The combination of the two modes provides very wide frequency band coverage, the highest sensitivity and extremely fast response time.

Spectrum Analyzer Operation Cases:
1. Test Intercom: http://www.tudou.com/listplay/pM5KI2-Hzbg/MgvADctXYwQ.html?FR=LIAN
2. Wifi Analysis: http://www.tudou.com/programs/view/NipwO5jfOB8/
3.Computer Software to Watch Wifi: http://www.tudou.com/programs/view/7FDm4AxUf0U/
                                                     http://www.tudou.com/programs/view/zIOk5p7Y9As/
4.Test Car Remote Key: http://www.tudou.com/programs/view/MgvADctXYwQ/
5.How to Update Firmware: http://www.tudou.com/programs/view/IAAkUHTgX2Y/

Features:
- Pocket size and light weight
- Solid aluminum metal case
- Spectrum Analyzer mode with Peak Max, Normal, Overwrite and Averaging modes
- Free firmware upgrade for life, in line with the characteristics of open source
- Rechargeable by USB
- Open source for Windows client
- Additional functions can be expanded through the built-in expansion module interface
- Wide band coverage to all popular RF frequencies, starting at 15MHz and going up to 2.7GHz. This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and for WiMax, Bluetooth, etc.
- Firmware: The built-in firmware version is 1.09. Some features of the product and the accuracy of operation will be continuously improved in subsequent firmware.

Official website: Link for http://www.rf-explorer.com/start
Software Operation Instructions: http://micro.arocholl.com/index.phpoption=com_content&view=article&id=52&Itemid=70

Note: This device does not include the signal generator function.

Technical Parameters:
- Measurable frequency range: 15-2700 MHz
- Single screen scanning frequency width: 600MHz
- Graphic LCD 128x64 pixels, high outdoor visibility
- Client for PC Windows supports for 32-bit and 64-bit Windows XP/Vista/Win7
- Backlight provides good indoor visibility
- Two standard SMA 50 ohm connectors, one for Sub-GHz broadband NA-773 telescopic antenna, and the other 2.4Gh zone for 15-2700 MHz frequency band, including helical antenna.
- Amplitude resolution: 0.5dBm
- Dynamic range:
* Left SMA port (WSUB1G): -115dBm to 0dBm
* Right SMA port (WSUB3G): -110dBm to -10dBm
- Absolute maximum input power (i.e. the maximum withstand voltage value):
* Left SMA port (WSUB1G): + 5dBm
* Right SMA port (WSUB3G): + 30dBm
- Average noise level (typical value): -110dBm
- Frequency stability and accuracy (typical value): ±10ppm
- Amplitude stability and accuracy (typical value): ±6dBm
- Frequency resolution: 1Khz
- Resolution bandwidth (RBW): Automatic 3Khz to 600Khz
- Dimensions: 112 x 71 x 25 mm
- Weight: 206g

Package Included:
- 1 x Spectrum Analyzer Main Unit
- 2 x Antennas
- 1 x Instructions