| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $62.65 | $61.37 | $59.45 | $56.90 | Contact US |
The Latest DDCS Version4.1 4 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDPMG
$329.72
The Latest DDCS Version4.1 3 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDMPG
$310.28
DDCS-V4.1 4-Axis Standalone Motion Controller Offline Controller Support 3 Axis/4Axis USB CNC Controller Interface
$296.11
Introduction
3M660 is a constant torque microstepping driver, voltage range from 24-58VDC, it’s suitable for various 3-phase NEMA23 & NEMA34 hybrid stepper motor. With the build-in constant current chopping circuit similar to servo driver, the motor run stable without vibration and noise in low speed. The torque in high speed is far better than traditional 3-phase and 5-phase stepper motor because of the high voltage. The precision can be high to 12800 steps/rev.
| Description | Min. | Typical | Max. | Unit |
| Peak Output Current | 1.35 | - | 5.8 | Amps |
| Supply voltage | 24 | 36 | 58 | VDC |
| Logic signal current | - | 10 | - | mA |
| Pulse input frequency | 0 | - | 200 | Khz |
| Pulse low level time | 2.5 | - | - | ms |
| Cooling | Natural cooling or forced wind cooling | |
| Environment | Space | Avoid dust, oil fog & corrosive gases |
| Storage temperature | -10℃ - 80℃ | |
| Working temperature | 65℃ Max | |
| Humidity | <80%RH | |
| Vibration | | 5.9m/s² Max |
| Weight | | 0.26 kgs |
