• ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module
  • ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module
  • ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module
  • ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module
  • ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module

ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module

Availability: In stock, usually dispatched in 1 business day

  • Price:$23.06
  • Price in reward points: 231 Reward Points: 2
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $22.60 $22.14 $21.45 $20.52 Contact US
Quantity:

ADL5350-EVALZ High Linearity Mixer Y Type Low Frequency to 4GHz ADL5350 Module

Description:

The ADL5350 is a high linearity, up-and-down converting mixer capable of operating over a broad input frequency range. It is well suited for demanding cellular base station mixer designs that require high sensitivity and effective blocker immunity. Based on a GaAs pHEMT, single-ended mixer architecture, the ADL5350 provides excellent input linearity and low noise figure without the need for a high power level LO drive.

In 850 MHz/900 MHz receive applications, the ADL5350 provides a typical conversion loss of only 6.7 dB. The input IP3 is typically greater than 25 dBm, with an input compression point of 19 dBm. The integrated LO amplifier allows a low LO drive level, typically only 4 dBm for most applications.

The high input linearity of the ADL5350 makes the device an excellent mixer for communications systems that require high blocker immunity, such as GSM 850 MHz/900 MHz and 800 MHz CDMA2000. At 2 GHz, a slightly greater supply current is required to obtain similar performance.

The single-ended broadband RF/IF port allows the device to be customized for a desired band of operation using simple external filter networks. The LO-to-RF isolation is based on the LO rejection of the RF port filter network. Greater isolation can be achieved by using higher order filter networks, as described in the Applications Information section.

Features:

- Power Supply Voltage: +5V DC
- Broadband radio frequency (RF), intermediate frequency (IF), and local oscillator (LO) ports
- Conversion Loss: 6.8 dB
- Noise Figure: 6.5 dB
- High Input IP3: 25 dBm
- High Input P1dB: 19 dBm
- Low LO drive level
- Single-ended Design: no balance-unbalanced converter needed
- Schematic diagram is provided for reference  

Package Included:
- 1 x ADL5350 High Linearity Y-Mixer

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha