| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $26.82 | $26.28 | $25.45 | $24.36 | Contact US |
TOOLTOP ET602 USB+WIFI 5CH 150KHz Automotive Oscilloscope Virtual Oscilloscope Supports Data Storage
$73.85
TOOLTOP ET601 USB 5CH 150KHz Automotive Oscilloscope Virtual Oscilloscope Supports Data Storage
$64.13
1008C 2.4MSa/s 8CH Hantek Oscilloscope Automotive Oscilloscope + One HT-201 Oscilloscope Attenuator
$126.25
Full Protocol Jumper Cable OBD2 Jumper to Connect ECU for ECU Programming for PCMtuner/MPPS
Description:
Full protocol OBD2 jumper is used to connect ECU for ECU programming via OBD2.
Product Functions:
1. Supports DC power supply
2. Support safety protection banana head super programming dedicated connection port power supply
3. Independent GND4, GND5 [meet the needs of special ECU programming]
4. With boot GND4 clip, compatible with programming equipment
5. With GND4 GND5 short-circuit switch [some ECUs need to be switched to short-circuit mode when programming]. Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch
6. With ignition analog switch [equipped with 1 large and 2 small dedicated ignition cables]
7. Support standard obd2 full protocol connection [double K line, double CAN line], 3 large and 2 small power plugs, 4 large GND, 4 small GND
Connection diagram of the dedicated programming power connector.
What is the analog ignition switch?
After the ING ignition switch is pressed, the line marked with ING12V will have 12v, which is the analog ignition switch. Because when some devices read some ECUs, the device will prompt to turn on or off the ignition switch.
Package Included:
- 1 x OBD2 Jumper
