Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $61.87 | $60.60 | $58.71 | $56.19 | Contact US |
NASPi 2.5inch SATA HDD/SSD Hard-drive NAS Storage Kit for Raspberry Pi 4B with 2 Micro HDMI Interface
Description:
- NASPi provides a quick and easy way to create your home media center and build network assisted storage (NAS) for your Raspberry Pi 4.
- The USB 3.0 port provides an ultra fast data transfer rate of up to 5Gbps, allowing you to transfer large amounts of data in seconds. The built-in LED indicates the read or write status - no more guessing.
- It supports booting the operating system from your HDD/SSD to speed up application opening, Web services, and file copying, and also supports UASP.
Wiki for Reference:
- User Manual: wiki.geekworm.com/NASPi
- Software: wiki.geekworm.com/X-C1_Software
- Installation Video(NASPi with X823 V1.3): youtu.be/RQGYf6Fqf6s
- Installation Video(NASPi with X823 V1.5): youtu.be/ithz2Mg5Vrc
Power supply:
- Power: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1)
Features:
- Interface: Micro HDMI x 2
- Fan: 4010 PWM fan (support speed adjustment)
- Connection line: 7pin (for switch/PWM fan control etc.)
- Safe shutdown: support
- Script requirements: yes
FAQ:
Q1: What is the thickness of a 2.5" HDD/SSD that can be accommodated?
A: The thickness of 2.5" HDD/SSD should not exceed 9.8mm. In fact, most 2.5" HDD/SSD on the market are only 7mm thick.
Q2: Will the Alu case affect the WIFI?
A: As our test, 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WiFi interference. As well as aluminum alloy case will interfere with pi 4's WiFi to a certain extent. So it is strongly recommend to use Ethernet or 5G AP. we have added an additional acrylic front panel as a backup. If you have WiFi problems during use, ls try to replace the aluminum alloy panel with an acrylic panel.
Package Included:
- 1 x NASPi Aluminum Alloy Case
- 1 X X823 V1.5 Expansion board
- 1 x X-C1 V2.0 Adapter Board
- 1 x PWM Fan
- 1 x Backup Acrylic Front Panel
- 1 x 7-Pin GPIO port