Professional Beidou GPS Repeater Indoor GPS Amplifier GPS Signal Repeater Amplifier for Indoor Use

Professional Beidou GPS Repeater Indoor GPS Amplifier GPS Signal Repeater Amplifier for Indoor Use

Attention:
- Beidou and GPS frequency bands are supported by default. If GLONASS frequency band is needed, please contact us before placing an order.
- A ceiling antenna can be used as indoor transmitting antenna. If it is needed, please contact us.
- The straight-line distance of receiving antenna of the main unit should be kept above 15m/49.2ft.

Optimization:
1. Enhance signal stability and reduce installation distance requirements.
2. Optimize the power supply performance and add working indicator light.
3. It can be used with lightning arrester (purchased separately) to ensure the safety and reliability of the equipment.
4. Cable length can be customized according to your requirements. Contact us before purchasing.
5. Transmitting power can be adjusted according to your needs (related to the installation environment).

Features:
- Professional GPS repeater of reliable quality
- The transmitting distance is over 10m/32.8ft, but the actual distance is about 15m/49.2ft. When the distance is long, the signal will gradually weaken
- Cable length: 30m/98.4ft
- Stable signal and no delay
- Simple installation and low cost

Function:
- Cover workshops, laboratories and other areas without GPS signals with high-quality GPS signals.
- The receiving antenna transmits the outdoor signal to a room through the cable, and after amplification again, it is wirelessly transmitted to the room for indoor GPS equipment. The GPS repeater amplifier is suitable for GPS test, GPS equipment detection line, production line, signal coverage at the bottom of tunnels and mines, and GPS signal coverage projects in underground and indoor parking lots.

Specifications:
Receiving Antenna:
- Frequency range: 1575±5MHz
- Polarization mode: Right-handed circular polarization
- Antenna gain: ≥3.5dB
- Amplifier gain: ≥40dB
- Noise figure: ≤1.5dB
- Reflection loss: -14dB (i.e. SWR ≤1.5)
- p-1: ≥10dBm
- Interference suppression: ≥20dB (f0±100MHz)
- Power supply: 3V/5V DC
- Connector: SMA
- Installation: Threaded (M24x1.5) connection
- Volume: Dia. 96 x 126mm/3.8 x 5"
- Operating temperature: -45°C to 85°C
- Storage temperature: -50°C to 90°C
- Humidity: 100%

Cable:
- Cable length: 30m/98.4ft
- Cable standard: SYV-50-3 (RG58)

Amplifier:
- Frequency range: 1575±5MHz
- Gain: 56db
- Voltage: 5V
- Interference suppression: ≥20dB (f0±100MHz)
- Reflection loss: -14dB (i.e. SWR ≤1.5)

Transmitter:
- Frequency range: 1575±5MHz
- Gain: 3.5DBI
- Reflection loss: -14dB (i.e. SWR ≤1.5)

Package Included:
- 1 x Main unit
- 1 x Transmitting antenna
- 1 x Receiving antenna with cable
- 1 x Power adapter

Packaging Details:
- G.W.: 3.2kg/7.1lb