C2 WiFi/Standard Version Multi Gas Detector Methane LPG Carbon Monoxide Alarm Sensor with Buzzer

* WiFi Version: Supports remote monitoring via mobile app. When gas leakage or excessive CO levels are detected, it provides both a buzzer alarm and mobile phone push notifications.

* Standard Version: Provides local safety protection with a built-in buzzer alarm when abnormal gas levels are detected.

* Note: WiFi Version has a higher operating current (210mA) compared with the Standard Version (170mA).

C2 Gas Detector with multi-gas detection capability, supporting simultaneous detection of methane (natural gas), liquefied petroleum gas (LPG), and carbon monoxide (CO). It features real-time online remote monitoring and provides alarm notifications in case of gas leakage or excessive gas concentration.

* Power Supply: USB Type-C 5V/1A

* Operating Current: 210mA (WiFi Version); 170mA (Standard Version)

* Methane (Natural Gas) Detection Range: 0-100% LEL

* Carbon Monoxide (CO) Detection Range: 0-1000ppm

* Operating Environment: -9 to 55°C, <90% RH

* Alarm Method: 

   ** WiFi Version: Sound Alarm (Buzzer) and Mobile App Push Notification; 

   ** Standard Version: Sound Alarm (Buzzer)

* Alarm Linkage Output: DC 5V

* 1 x Main Unit

* 1 x USB Charging Cable

* Package weight: 0.25kg

1. Power On/Off:

* The product powers on automatically when connected to a power supply. Simply connect the USB Type-C 5V DC power source to start operation. Disconnect the power supply to turn off the device.

2. Operation Instructions:

* After powering on, the display will show "Warming Up". Once the warm-up process is completed, the device enters normal detection mode. The gas concentration value and carbon monoxide (CO) value will both display in green as "000", indicating normal status.

* After 5 minutes of continuous operation, the product will enter screen saver mode, and the display brightness will be reduced to the lowest level.

3. Button Functions:

* When the product is in an alarm state, press the button to mute the alarm sound.

* When the product is in screen saver mode (low brightness mode), press the button to restore the display to normal brightness.