Clock Buffer 1-IN 6-OUT/8-OUT 200MHz Low Phase Delay Crystal Oscillator Active Power Splitter

Introduction:
- LMK1C110x is a modular, high-performance, low skew, universal clock buffer series device for Texas Instruments (TI). The entire series is designed using a modular approach.
- All devices in this series are pin compatible with each other and backward compatible with the CDCLVC110x series, making it easy to operate.
- All devices in this series have the same high-performance characteristics, such as low additional jitter, low skew, and a wide operating temperature range.
- LMK1C110x has a synchronous output enable control terminal (1G) that can switch the output to a low level state when 1G is at a low level. These devices have fail safe inputs that prevent output oscillations in the absence of an input signal and allow for input signals before VDD is provided.
- The LMK1C110x series can operate at voltages of 1.8V, 2.5V, and 3.3V, and is characterized by its ability to operate within the range of -40°C to 125°C.

Features:
- Output skew is extremely low, <50ps.
- The additional jitter is extremely low, with a maximum value of <50fs
  Vdd=3.3V, a typical value of 7.5fs
  Vdd=2.5V, a typical value of 10fs
  Vdd=1.8V, and a typical value of 19.2fs
- The propagation delay is extremely low, <3ns.
- Enable synchronous output.
- Power supply voltage: 3.3V, 2.5V, or 1.8V.
  3.3V tolerance input at all power supply voltages
  Failure protection input
- fmax = 250MHz (3.3V); fmax=200MHz (2.5V and 1.8V)
- Working temperature range: -40°C to 125°C
- Adopting an 8-pin TSSOP package
- Adopting an 8-pin WSON package

Applications:
- Factory automation and control
- Telecommunication equipment
- Data center and enterprise computing
- Power grid infrastructure
- Motor driver
- Medical imaging

Specification:
- Power supply: 5V
- Input and output interface: SMA female connector
- Size: 5 x 5cm

Package Included:
- 1 x Clock Buffer