Samurai3 Rotating 3-Axis Robotic Arm Mechanical Arm Robot Arm Assembled Support G Code Control

Samurai3 Rotating 3-Axis Robotic Arm Mechanical Arm Robot Arm Assembled Support G Code Control

Features:
- G code control
- Powerful and mechanically beautiful
- Convenient function expansion
- Gear ratio suitable for angle calculation

Specifications:
- Production year: 2021
- Alias: Three-axis PTZ
- Number of axes: Three-axis: X-axis base rotation, Y-axis pitch, Z-axis end rotation.
X axis rotation range: 360°+; reduction ratio: 22.5:1. Y-axis pitch range: ±120°; reduction ratio: 22.5:1. Z-axis end rotation: 360°+; reduction ratio: 11.25:1
- Round trip accuracy: Within 0.5mm (16 subdivision, acceleration 200, movement speed 12000 test)
- Maximum load capacity: 0.8kg (weight-bearing balance test)
- Machine outline: L = 200mm, H = 400mm, W = 170mm
- Motion control: For Arduino uno + A4988 all-in-one board, for ATMMEGA328P; System GRBL 1.1; Physical interface: USB line; Com port sending G code control
- Host computer: Provide free software for Emile3C. Software that supports GRBL control can be used to control. Upper computer sends G code through serial port, and lower computer GRBL interprets and executes the G code. The upper computer can be a computer or an MCU.
- Shaft rotation speed: Fastest rotation speed: 12000°/min
- Deceleration mode: Multi-stage synchronous belt wheel deceleration
- Motor: All three axes use 42 stepper motors. Model: YH42BYGH47. Working voltage: 12V, current peak value 4.5A
- Material: PVC hard board, aluminum support, steel shaft
- End connection: The end retains diameter 8 round shaft, length 20mm
- Product weight: 4kg

Package Included:
- 1 x Set of Robotic Arm