ZU19 High Performance Development Board 4K HDMI-compatible Output for ZU19_Eval UltraScale + MPSOC ZU19EG Development

ZU19 High Performance Development Board 4K HDMI-compatible Output for ZU19_Eval UltraScale + MPSOC ZU19EG Development

Features:
- Support for LPC/HPC/FMC+
- Rich image interface, can be extended to 4K HDMI-compatible output through QSFP28.
- For Panasonic Megtron 6 board, with stable and high-speed performance.

Master Chip Specification:
- Chip model: XCZU19EG-FFVC1760-2-i
- Clock recommended maximum speed: up to 775M for PLL/MMCM
- PS application processor model: four-core ARM Cortex-A53 1333MHz main frequency
- PS real-time processor model: dual-core ARM Cortex-R5 533MHz main frequency
- DDR specification model: DDR4, model of MT40A1G16TB-062E
  PS terminal: 8GB capacity, 64bit, 2400M
  PL terminal: 8GB capacity, 64bit, 2666M
- Logic unit (LC): 1143K
- Look-up unit (LUT): 523K
- DSP unit multiplier: 1968pcs
- Trigger (FlipFlops): 1045K
- Block Ram: 34.6M Byte
- Ultra Ram: 36M Byte
- GTY (32.75G): 16pcs, 4 x Quad
- GTH (16.3G): 32pcs, 8 x Quad
- Component temperature range: -40℃ to 85℃
- Speed level: -2
- Chip level: industrial

ZU19_EVAL Function Interface Description:
- Power supply/heat dissipation: powered through a dedicated TYPE-C interface, 9-12V DC-IN interface; The interface has PD 12V function. A GH1.25-3P 5V radiator interface.
- Development board clock: 33.33M(PS), 50M(PL), 100M(PL), 26M(PS GTR), 27M(PS GTR), 100M(PS GTR), 156.25M(GTY), 125M(GTY).
- Ethernet: two Gigabit RTL8211E-VL, one located in PS GEM3 and the other in PL.
- USB interface: USB3.0 SLAVE & HOST, support USB2.0
- Debugger: onboard UART + JTAG (JTAG maximum 30M) supports for ARM and FPGA development.
- Onboard FLASH: 128M byte in total, two magnesium QSPI particles
- SD card slot: PS SD1, 2.0 interface, bootable (SD supports up to 32GB)
- EMMC: SD0 of PS, with a capacity of 32GByte
- M.2 connector: one M.2 NVME (PCIE) interface, X1 bit width, on PS.
- DP interface: a Mini DP interface, maximum support 4K at 30Hz, on DP.
- High speed expansion interface: one SFF8654 interface, expanded 2 Quad GTY.
- HDMI-compatible output interface: a HDMI-compatible output that uses LVDS to simulate IO direct connection, maximum 1080P at 60Hz.
- HDMI-compatible input interface: one HDMI-compatible input for ADV7611, maximum support 1080P at 60Hz.
- LED and buttons: power on/off/POR reset, PS/PL button/PL LED power status indicator/DONE indicator, USB indicator, etc.
- FMC interface: one FMC + interface female socket, full specification, LA+HA+HB+24GTH (16.3G)
- Boot setting switch: a BOOT dip switch for initiating settings
- High speed optical port: 2 QSFP28 100GE optical ports, GTY, maximum line rate of 28Gbps
- Heat dissipation interface: one 5V heat dissipation interface, GH1.25-3P terminal
- Camera interface: 1 x MIPI 2 Lane, FPC1.0-15P; 1 x MIPI 4 Lane, FPC0.5-24P
- Note 1: Except for DC-IN which can provide power, all TYPE-C are suspended without power supply function, so there is no need to worry about accidental insertion.
- Note 2: The PCB board is made of M6 board for Panasonic, with 20 layers of PCB.

Package Included:
- 1 x Development Board
- 1 x Type-C 2.0 Cable
- 1 x Type-C 3.0 Cable
- 1 x 12V/3A Power Adapter