ZLG CANFDBridge Industrial High Performance CAN/CANFD Bridge Intelligence Protocol Network Bridge

ZLG CANFDBridge Industrial High Performance CAN/CANFD Bridge Intelligence Protocol Network Bridge

Description:
- CANFDBridge is a high-performance CAN/CANFD intelligent protocol bridge, which Integrates 2-channel CAN/CANFD switchable interface, support ISO standard CANFD and Bosch CANFD standard. Each interface has an independent 2500VDC electrical isolation protection circuit, which can prevent the interface card from being damaged due to ground circulation and enhance the reliability of the system in harsh environments.
- This product can quickly connect traditional CAN bus devices to CANFD bus.
- This product can increase the load node and extend the communication distance, and realize the function of network relay expansion.
- Arbitrarily configure the communication baud rate of each channel to realize CAN/CANFD network interconnection with different communication baud rates.
- This series of products has powerful ID filtering conversion and data conversion functions, and the accurate acceptance ID configuration reduces the load of the CAN bus. Or change specific IDs and data to achieve the goal of removing interfering data and distinguishing different devices.
- It has a strong anti-interference ability to prevent the user's equipment from being interfered and crashed.

Features:
- Each CAN channel supports a filtering configuration of 64 sets of standard frame single ID/standard frame group ID/extended frame single 1D/extended frame group ID, effectively filtering unnecessary data and reducing bus load.
- It used three methods: direct conversion, merging, and splitting to convert the 8-byte length of traditional CAN and the 64 byte length of CAN FD, and restore the original data without loss.
- CANFDBridge can integrate traditional CAN bus networks with CAN FD networks through protocol conversion to quickly upgrade CAN devices.
- CANFDBridge supports the conversion and mapping of ID and data, which can convert input packets into specific ID and data outputs, achieving network access of the same device.
- CANFDBridge has the function of sending error messages back, allowing local devices to be aware of the operation of the bus on the other side, and improving fault warning capabilities.
- 2500VDC electrical isolation CAN/CAN FD interface, electrostatic level contact discharge ±8KV, helps you effectively isolate interference.
- CANFDBridge has built-in configurable terminal resistors, which can be enabled or removed by users through software; Equipped with a custom baud rate calculator, it can calculate the TESG1, TSEG2, SJW of the matching network, and the baud rate register of the sampling point, improving the adaptability of the device.
- Through the configuration interface of CANFDBridge, it has the function of reading communication error status, which can easily find the approximate direction of faults and facilitate troubleshooting of software and hardware problems.
- ZCANPRO supports ECU refresh and E2E security algorithms, provides UDS protocol services, adds flash files and applies actuators, making it easy to complete ECU data security and fast innovation.

Package Included:
- 1 x CANFDBridge
- 1 x USB Communication Cable
- 1 x Pack of Accessories